How to Hack CCTV via Android – To maintain environmental security in offices, school buildings, shops, housing and others, a surveillance camera such as CCTV will usually be installed.
While CCTV itself is a video-based surveillance system (Video Surveillance) that uses a camera.
With CCTV, all activities will be recorded and detected properly, even suspicious activities.
Either indoors or outdoors, according to the place where the CCTV camera is installed.
Discussion on How to Hack CCTV via Android
If you want to hack or tap CCTV, then you can do it in various ways, one of which is using an Android device.
Apart from Android, you also use other devices such as computers or laptops.
So that Android can be used to hack, then you have to make sure if the device is connected to the internet or wifi connection.
The process of hacking CCTV using an Android device can also be done easily, because Android already provides special features for installing hacking applications.
How to Hack CCTV via Android
How to Hack CCTV via Android using the Eagle Eyes Lite or Eagle Eyes Plus Application
 |
| How to Hack CCTV via Android using the Eagle Eyes Lite or Eagle Eyes Plus Application |
We recommend two applications that will be used to hack CCTV, namely the Eagle Eyes Lite application or the Eagle Eyes Plus application.
However, both of these applications are paid and free, guys, but we recommend using the free one, because it is still in the learning and testing stage.
- For the first step, please download and install the Eagle Eyes application on your Android via the following link (Download the Eagle Eyes App).
- Then open the application and select it and press the plus sign at the bottom left. If you have, a pop up will appear and press manual, then next there will be Title, IP address, Port, Username and password.
- Meanwhile, to find out the IP address, you must use the Wifi File Transfer application. To download the application, you can use the following link (Download Wifi File Transfer).
- Then open the Wifi File Transfer application after it is successfully installed and press the Start button, the IP address will automatically be displayed.
- Next, fill in the IP address according to what you know, while the title can be filled with any name.
- For the username, it can be seen in the connected wifi connection settings.
- To fill in the password, please fill in the password used. But if you haven’t got the password before hacking, then you have to hack the nearby wifi first.
The final word
Those are some ways to hack CCTV via Android that can be learned and applied.
In order for the hack process to run smoothly, we recommend doing each step well with.
In addition, continue to use the hack method wisely, so that no party is harmed.
