How to Fix Active Speaker No Sound 2022

How to Fix Active Speaker No Sound – Active speakers are devices for reproducing sounds or music whose capabilities are designed in such a way, to match the threshold of human hearing ability.

This active speaker consists of several speakers that can be adjusted according to your wishes.

The frequency range is also in the range of 20Hz to 20,000 Hz (a frequency that can still be heard by the human ear).

The speaker itself functions as a final converter so that the electrical signal can be converted into physical vibrations that produce certain sound waves.

The speaker system is the key to the sound quality produced and the sound quality is also influenced by the speaker design.

Discussion on How to Fix Active Speaker No Sound

So, even if your recording file is good, if you listen to it using a bad speaker system, the sound will automatically be bad.

But sometimes there are some active speakers that have no sound caused by several factors such as damage, errors and others.

You can repair the speaker yourself as long as the damage is not too severe so you can save costs.

By knowing how it works and functions like the review above, of course it will be easier to fix it if the active speaker has no sound.

For more details, you can refer to the following review on how to fix active speakers with no sound.

How to Fix Active Speaker No Sound

1. How to Fix Active Speaker No Sound by Knowing Some Speaker Components

How to Fix Active Speaker No Sound by Knowing Some Speaker Components

There are several components that must be known that are contained in active speakers so that the repair process is easier.

The following will explain how to fix an active speaker with no sound by knowing some of the speaker components:

Midrange, which is used to reproduce mid tones such as singers and drums
Tweeters, which are useful for producing high notes such as violins or cymbals.
A woofer that produces low notes such as bass and drum sounds
Tune Control which consists of Mic Control 1, 2 da 3, Volume Control, Bass, Treble and Echo which functions to adjust the waveform so that certain sounds can be produced according to what you want.
Mic terminal which is useful for connecting Mic devices with speaker system
Power ON/OF switch which is useful for connecting and disconnecting electricity to the speaker system.
The Power indicator functions to indicate whether the speaker is active ON or OFF
Power cable serves to connect electrical signals
L/R Speaker Terminal is used to connect right/left speaker devices
Line IN/OUT terminal for sending and receiving signals from audio devices such as guitar, keyboard and bass.
Ampifier serves to amplify or enlarge the output signal from the speaker.
The Active Speaker Box is useful as a protective case for the active speaker system.

2. How to Fix Active Speaker No Sound

Fixed Active Speaker No Sound

As for how to fix active speakers no sound as follows:

Check the indicator light. You should check the wires leading to the socket, power and transformer if the lights don’t come on.
Then check the power supply components.
Then open the fuse and check the fuse on the back using the AVO meter.
Then open the rear box cover and check the fuse on the PCB board using the AVO meter.
The way to use the AVO meter is to point the AVO meter to the RX1 and then plug the black and red wires on the side of the fuse. You must replace the fuse with a new one if the AVO needle does not move because it is damaged.
Then check the connector to the power supply by removing it and after checking it, please plug it back in.
Proceed to the amplifier and immediately replace it with a new one if any damaged components you encounter.
Amplifier output cables to the speakers are also checked including the tweeter, midrange and woofer. Check carefully one by one the speaker circuit.

It’s possible that the PCB machine component is having problems if you don’t find a problem when the speakers are active but there is no sound.

So check the PCB components one by one and immediately replace them with new ones if found damaged components.

3. Tips for Caring for Active Speakers

Tips for Caring for Active Speakers

So that electronic items, especially active speakers, can last a long time in use, they must always be cared for and maintained.

There are several tips that you can apply to maintain it, including:

Keep active speakers out of the reach of children to prevent them from being crushed or slammed.
Place in a dry, flat and clean room.
When not in use for a long period of time, unplug it and securely connect the cable so that other devices are not disturbed.

The final word

You can use the methods above to fix active speakers without sound.

Try to check the speaker components in detail so that the location of the damage can be identified and the corrective steps taken are also appropriate.

Also apply some of the tips above to care for and keep the speakers from getting damaged quickly.

That’s the whole content of our article this time about how to fix active speaker no sound 2022. Hopefully useful and good luck.