How to Add a Wifi Router at Home, Office, to School – The addition of a wifi router is usually needed to expand internet coverage in a large place or area. Usually applied to places such as schools, campuses, large offices, to an area. This is so that the internet signal is not lost if it is reached or accessed from a place far from the internet source. Here’s how to add a wifi router that can be practiced easily:
How to Add a Wifi Router at Home, Office, to School
1. Prepare Main and Secondary Router
The first way to add a wifi router is to prepare and set a primary and secondary router. The main router is the router that will be connected to the modem and the wall outlet. The use of a more complete and adequate router as the main router is highly recommended. This is due to improve the quality of device resistance as the main distributor.
Secondary router is a router that serves to extend the reach of the internet. Later the internet will be distributed or distributed to other devices such as computers, laptops, cellphones, and other digital devices. The secondary router is in charge of controlling the LAN or WAN network that is created. If you have two or more of the same router, you can use one as the main router.
2. Define the Secondary Network
The type of secondary network or network to be deployed more widely must be determined in advance. Whether to use a LAN to LAN or LAN to WAN network. The two types of networks have slight differences in their use. If you want to expand your WiFi network using a second router, you can apply a LAN network to a LAN.
LAN to LAN network can also function to exchange or share files with other devices connected via a LAN network cable. Conversely, if you want to create a second network in the main network, it is more likely to use a LAN to WAN network. This network can make it possible to place restrictions on computers and other connected devices.
3. How to Add a Wifi Router, Main Router Settings
Before being distributed, the main router is set up first. Connect the router via LAN cable on your computer or laptop. Make the settings as if using only one router. Each router model has different settings. If you are still confused or in doubt, you can see the manual or other sources of information about the initial settings for the main router.
Make changes to DHCP settings. If you want to create a LAN to WAN network, you can set the main router’s DHCP service to an IP address between 192.168.1.2 to 192.168.1.50. if you want to create a LAN to LAN network type, you can set the default DHCP service. If the initial setup is complete then don’t forget to disconnect the computer from the router.
4. Set Up Secondary Router
Connect the second router with a computer or laptop. Set the IP address on the second router to match that of the main router. The IP address on the secondary router must be in the same network address as the primary router. If using a LAN to LAN network then turn off the DHCP service on the secondary router.
5. Connect Both Routers
The two routers are connected using a LAN cable. On the main router there will be slots LAN 1 to LAN4 for inserting cables. The slot can be used by adjusting the intended use or adding a LAN cable, respectively. If for the addition of a regular router, it can be installed in any slot, usually the number of slots differs depending on the type and model of the router used.
Next connect the LAN cable on the secondary router. The cable is connected to the slot of the router. Similar to the previous router, there are several slot holes that can be used with the type or name of each slot. The LAN cable is connected to the slot that says internet or WAN. Usually there are 2 or more slots depending on the type of router used.
Here’s how to add a wifi router that you can do if you want to add and expand your internet network at home, school, or office. Of course the above method can be used and applied easily.
Also Read: How to Find out Wifi Password.
