How to Reset the HP Deskjet 2135 Printer – Documents can be printed using a printer, which is a hardware device. Office printers and copiers are common examples of printers.
The HP brand is one of several types or brands of printers that are quite popular.
In Indonesia, HP brand printers, especially the HP 2135 printer, are among the most popular. Its high quality and features make it a very popular printer.
The design is also more attractive and simple than other printer brands. Usually the HP 2135 printer has problems, including cartridge problems, ink, the printer does not detect and others.
Resetting the computer is one of the most popular methods for fixing this problem.
When there are problems with the printer, such as cartridge problems, printer not detected, etc., the reset option is usually the solution that users use to fix the problem.
With this reset process, all printer functions will be restored, and users hope that the printer will not experience problems in the future.
This can also be done if the HP 2135 printer that you are using has problems.
Cause of Error Indicator Light Blinking on HP 2135 . printer
1. Used or counterfeit ink cartridges.
2. There is not enough ink in the cartridge.
The solution:
- It is possible that the newly installed ink cartridges are counterfeit or have been used before.
- For more information, check the messages in your HP printer software.
- The ink in the cartridges is low if the corresponding cartridge is not a new one. Continue printing by pressing the Resume/Continue button.
How to Reset a Flashing HP Deskjet 2135 Printer
- Make sure to turn off the printer before resetting it.
- Press the power button on the printer to turn it off. The next step is to unplug the power and USB cables from the PC or laptop.
- After the reset process is complete, you must place the paper in the printer tray. The point is to do an ink quality test.
- To test the ink quality after the reset process is complete, you must place the paper in the printer tray.
- Remove the printer stand by hand and gently pull it toward the center of the printer.
- Taking the printer cartridge marked with a flashing indicator and reinstalling it in the middle is the next procedure.
- The next step is to connect the power cable and USB printer.
- You can also press the cancel (x) button on the printer and hold it down for a few seconds.
- Finally, hold down the power button for a few seconds.
- You must press and hold the button above for 5-10 seconds or make sure the indicator on the printer is blinking so that the reset process can run properly.
- After the reset process is successful. Your information will then be available for printing. The information includes information about the cartridges and the quality of the printer ink.
- The HP 2135 printer has been successfully reset to this point.
It should be noted that if the previously printed information or the information provided is not good, you will need to reset it again. However, the reset process does not need to be repeated if the test results are good.
The HP 2135 printer can be reset in this way, Apart from resetting the cartridges, this method also solves the problem. Generally, errors and problems with the HP 2135 printer are caused by a faulty printer cartridge.
It is important to do the above carefully and patiently, especially during the reset process and while waiting for the indicator light to flash. The indicator light may not flash immediately.
Other Uptodown Articles:
Snsboost Instagram 10000 Followers Free Instantly
How to Remove Filmora Watermark Without Permanent Application
How to Copy Free Fire ID
