Solutions for stuck logo on Samsung Galaxy phones. How to fix stuck logo on Samsung Galaxy S2 GT-I9100. How to flash/reinstall the Samsung Galaxy S2 GT-I9100 due to download errors, application errors, insensitive touchscreen, virus internal memory, boot loop loading, until it’s completely dead, you can update the firmware as long as it’s detected in the computer driver.
Samsung Logo Stuck Solution. If possible, you can also reset the Samsung Galaxy S2 GT-I9100 by pressing three buttons combined. when the cellphone is off, press and hold the Vol Up + Home + Power button until the android robot image appears. Samsung Galaxy stuck the logo and then wipe user data but sometimes this is not enough to help HH actually needs Flashing Update.
Equipment that must be prepared Solution stuck Samsung Galaxy Logo:
- Samsung Galaxy S2 Firmware Download
- Samsung USB Drivers Download
- Odin Download
- Data cable
- Laptop or Computer
Note: Try to keep the battery at 70% or more to keep it from dying during installation because if it dies during installation it can trigger a bootloop or a stuck logo or it can include a damaged mmc.
Steps on how to fix the stuck logo on a Samsung Galaxy bootloop on a Samsung Galaxy S2
- Extract Samsung Galaxy S2 Firmware and Install Samsung USB Drivers
- Extract and Install Odin, keep it open
- When the cellphone is off, enter download mode together by pressing the Vol Down + Home + Power buttons simultaneously.
- If you have entered the warning menu there are 2 options there, namely “Continue” and “Cancel” you select Continue together by pressing the Vol Up button
- After that, you connect the cellphone to your laptop or PC
- If it is already connected, then in the Odin application there is an ADD post
- Then enter G130HXXU0ANL3_G130HOLB0ANL2_G130HXXU0ANL2_HOME.tar.md5 by clicking on PDA then looking for the file G130HXXU0ANL3_G130HOLB0ANL2_G130HXXU0ANL2_HOME.tar.md5 then click ok
- Then check Auto reboot and F. Reset time
- If the methods above have been done correctly and as shown below, then choose Star
- Wait for the flashing process until there is a pass post
- After the process is complete, your cellphone can restart automatically and in the boot process it can take 3-5 minutes to be patient for a moment.
- Done, Congratulations, your cellphone can be reused and there are no errors or hanks again
So many articles on how to Fix the Samsung Logo on a Samsung Galaxy or how to Overcome Bootloop on the Samsung Galaxy S2 GT-I9100, hopefully this method can increase knowledge for all of you. If there is a dead link or something you don’t know, you can comment below.
Popular Search
samaung tab s2 stuck logo- Samsung GT S7562 stuck at logo-
