Entering Safe Mode is the best way to diagnose and fix various problems with your PC. For example, such as being exposed to viruses, malware, problematic drivers, boot failure, crashes, and others.
Then, how to enter Windows 10 safe mode? In the past, we could enter safe mode by pressing F8 during the boot process. But this method doesn’t work now.
Don’t worry, you can still enter Windows 10 safe mode in the following ways.
Safe Mode Type
Before that, it’s a good idea to know in advance about the types of safe mode. There are four types of safe modes, namely:
- Minimum: Windows runs very few programs, only essential programs.
- Alternate Shell: Windows will start the computer through the Command prompt. The mouse will not work in this mode. You should understand the commands in CMD.
- Active Directory Repair: A bit difficult to explain, easy safe mode is specifically for hardware-related repair problems. If you are not an expert on computer problems, you should not need to access safe mode on this one.
- Network: You can enter safe mode and still be able to connect to the network (local network, wifi).
For you, I recommend entering minimal safe mode or network only. This is to minimize bad things that might happen.
How to Enter Windows 10 Safe Mode
There are 3 ways you can use here, namely normal mode, windows 10 mode fails to boot, and through the login screen.
1. Enter Safe Mode Via Normal Mode
- Open Run Command (Windows + R)
- Type msconfig, then click OK or press Enter.
- Scroll to the Boot tab, check the Safe mode column. Click OK.
- Select restart.
- Wait until the restart process is complete.
- If you manage to enter safe mode, there will be safe mode writing at the top and bottom edges of the screen.
2. How to Enter Windows 10 Safe Mode that Fails to Boot
If your PC fails to boot, stuck when it is turned on, you can use this method to enter safe mode.
Because even if your PC has a problem and is stuck on the welcome screen, safe mode can still be accessed and run normally.
- Enter the password (if your PC uses a password)
- You have successfully entered into safe mode.
3. Enter Windows 10 Safe Mode Via Login Page
You can use this method to enter Windows 10 safe mode via the login page, where you enter the password when the new PC is turned on.
How to Exit Windows 10 Safe Mode
How to get out of Windows 10 safe mode is almost the same as how to enter safe mode via normal mode. Just changing the tick.
- Open Run Command (Windows + R)
- Type msconfig, then click OK or press Enter.
- Switch to the Boot tab. Uncheck safe mode.
- Then, click OK. Restart your PC.
You have successfully exited Windows 10 safe mode.
Conclusion
If your PC is in normal condition, then the best way is to use the Windows 10 safe mode entry tutorial number 1 and 3. If your PC fails to boot or is stuck on the welcome screen then method number two is the best choice.
If you are not very familiar with computer problems, we recommend using only minimal safe mode and network safe mode.
That’s how to easily enter Windows 10 safe mode. The difference between PC and Windows 10 versions, may cause it to look a little different. But, the point is the same as long as it’s still Windows 10.
