Blue screen can be one of the most unwanted problems. Because the cause of the blue screen is generally not trivial. Damage can occur in damaged hardware or software crashes.
This blue screen can happen suddenly when the gadget is in use, but it can also happen after the update is done. The most common blue screen signs are usually a PC or laptop asking to restart.
The most severe sign is that the laptop or computer just turns off.
What Causes Blue Screens?
The following are some of the things that often cause bluescreen on your device.
1. Overheat or Gadget Too Hot
If gadgets too hot, then restart will not solve the problem blue screen that happened.
You have to wait until the laptop or computer cools down first and then do restart return.
Also read: How to type 10 fingers
2. Exposed to Malware
Malware can cause a blue screen, the part that is attacked by this malware is in the windows kernel.
Kernels that are attacked by malware make the operating system unstable and then cause blue screen.
3. Update Drivers
Problem driver updates which does not fit is not a big problem. However, it still causes a blue screen and the problem doesn’t go away with just a restarts.
Generally, driver updates bits that don’t match, don’t finish, or an old series is the cause.
4. RAM damage
Damaged RAM can also cause blue screens to occur, and this means that RAM needs to be replaced.
If there is spare RAM, you can try replacing it first to make sure. Likewise, if your PC has 2 RAM or more, you can try removing it one by one while testing. If it’s from RAM, you’ll see which RAM component is damaged.
5. VGA Damage
The blue screen caused by a faulty VGA will display “Page Fault in Nonpaged Area”.
This sometimes happens to VGA that is old, or overclocked.
6. Broken Fan
A broken fan can cause a blue screen for a variety of reasons. Could be because overheating, overclockingas well as a corrupt processor and BIOS.
Usually, a fan that is not good is easy to tell by its noisy sound.
7. Less Memory
Memory on a device that is not large enough or is almost full can also be the cause of a blue screen PC.
Especially if you know that the memory is almost full and then install the software. You can be sure that the installation process is complete windows blue screen.
To overcome this of course you need to increase memory capacity or delete some data.
8. Loose Hardware or Cables
Not forever blue screen what happened as a result hardware due to faulty hardware. This could have happened because of the hardware or the cable is loose and not properly attached.
Among the causes above, the most severe of course damage to the hardware. Because the only way to fix it is to replace it.
Replace hardware also not an easy matter, the cost is quite expensive and certainly drains the pocket.
From the causes of the blue screen laptop screen above, how to fix it?
Ways or Steps to Overcome Blue Screen
To overcome blue screen depending on the cause why the blue screen occurs. Usually you can tell what’s causing it from the second time after a failed restart.
Here are ways to deal with a laptop or PC device that has a blue screen:
1. Restart Computer
Do restart is the first step you should try. Who knows the blue screen occurs just because of software crashing which can be solved by restarting.
If when you want to restart the process doesn’t run and the screen is stuck it stays on blue screen, just force it. You can force the PC to do restart by pressing the power button long enough until the device turns off. Then, after turning off the new restart the device as usual.
2. Using Microsoft Fix it
Microsoft fix it can be an easy way to solve the cause of the blue screen laptop on Windows 10 and even 7.
It’s just that using fix it is quite risky so you shouldn’t do it yourself and leave it to the experts. You can download Fix it at the official Microsoft address.
3. Boot into Safe Mode
Safe mode make only the most important drivers and hardware operational. This method can be used if you want to enter the operating system to remove or repair software which crashes.
The way to do safe mode is:
- Turn on the laptop as usual
- When the screen appears immediately press F8
- Window safe mode appears, select settings -> updates and recovery -> recovery
- Choose an option troubleshoot
- Click startup settings -> restart
From here you can enter the safe mode window and please make repairs or software updates.
4. Looking for Troubled Hardware
What do you do when on the screen blue screen it is not written which hardware is the problem?
To find out about this you can first go to safe mode and then do:
- Click start
- select computer (if it’s not there, just type it in search bar on start)
- Find where you put your windows installation
- Right click on the drive containing the windows installation
- Right click -> properties
- select Tools tab -> click “Error checking system”
- Click “Check now”
- In the pop-up select “Automatically fix and Scan”
- Click start
Until here you just have to wait for the identification process hardware which one is broken is finished. If it’s finished, please replace it immediately hardware damaged so that the performance of the PC or Laptop returns to normal.
5. Using System Restore
System restore you could say it’s a magic tool, because with it you can go back to the time before it broke. Sadly, system restore can only be done can you have previously saved or created restore points.
To use a restore point that can usually fix the blue screen due to a problem software the method :
- Click start
- On search bar type “restore points”
- In the system properties window that opens, select the tab “system protection”
- Next select system restore -> next
- Choose a date restore saved -> next -> finish
Once done pressing the button finish, PC or laptop will soon do restarts. Process restart This takes place according to the number of differences in system restore and the current state of the PC blue screen. The more differences, the longer the process restore.
Preventing Blue Screens
As the saying goes, prevention is better than cure right? So, instead of figuring out overcoming blue screen windows 10 to 7 and fix, better prevent.
To prevent the occurrence of blue screens, especially those that occur due to software, it’s easy.
You are as diligent as possible to update windows and the latest security services as they become available. With the latest software, automatic protection and performance is also better.
The causes of the blue screen above, are problems that usually occur. For causes due to software problems, it’s easiest to use system restore or if you can’t re-install. While the damage is due to hardware problems, please find which one is damaged and replace the hardware.
