How to Flash Redmi 3 / Redmi 3 Pro Easy Tutorial [100% WORK]

For those of you Redmi 3 or Redmi 3 Pro mobile users who are experiencing problems such as bootloop or locked MI accounts? don’t worry because here I will discuss how to Flash Redmi 3 or Redmi 3 Pro.

Problems like the above are usually caused by excessive use of cellphones or cellphones being slammed intentionally or unintentionally.

And to overcome this problem, action is needed, namely by flashing your cellphone so that it can live and be used as before.

Flash is a method of disassembling software to replace it with a new one. What this means is firmware.

Firmware is a very important program for your cellphone because in the absence of firmware then your cellphone cannot be turned on and used.

Preparation of Tools and Materials

To start the process flashing Of course there are preparations that need to be done such as understanding or the tools and materials to be used.

Here I suggest that you first understand the process flashing such as cloud processes and risks.

For process flashing itself is a method of replacing firmware which has been broken with firmware the new one.

And there is a risk that you have to bear, namely the most common thing is to lose all data or even your cellphone will experience total death if the process is done flash fail.

But you don’t need to worry because the method I will explain is guaranteed work 100% if you follow the way.

• The Redmi 3/Redmi3 Pro cellphone that you will be flash.
• Laptop as a medium for flash Or you can use a computer too.
• Data cable to connect between cellphones to be connected flash with a laptop or computer.
• MI Flashtool as software that helps do flash.
• File firmware Redmi 3/Redmi 3 Pro.
• Qualcomm Driver so that your cellphone is read on a laptop or computer.

You can download the file in the table I have prepared below.

Also Read: How to Flash Advan S5E

Redmi 3 Flash Tutorial

Furthermore, if you have downloaded the file above, now extract it first and then install it for MI Flashtool and its Qualcomm Driver.

And it would be nice for you to read thoroughly first about the method and then just start practicing it yourself according to the existing method.

Immediately, for how you can see carefully according to what I will explain below.

• The first thing you have to do is make sure that your cellphone is fully charged or at least 70%.
• Then you go to the menu “Pre-Recovery“by pressing the button”Power And Volume +“then after logo”MI“appears you release the button”Power” and keep holding the button “Volume +“.
• Then a display like this will appear and you select “Download“and the phone will “Blank“The sign has entered the mode”Download“.

• Next you connect your cellphone with “Data cable“.
• Now open”MI Flashtool” Then it will appear like this.

• If you have selectedRefresh“So that your cellphone drivers are read.

• Now you chooseSelect“Then select a folder”firmware” which you extracted earlier.

• Then at the bottomMI Flashtool“you can choose”Clean All“.

• If it’s all now you can click the button “Flash” to start the process flashing.

• You wait about 10 minutes for the process flash but it could take longer it all depends on your cellphone.

• If you have now you can turn it on manually using the “PowerAnd the cellphone can be used again.

Also Read: How to Flash Asus x014d

That’s the discussion about How to Flash Redmi 3/Redmi 3 Pro, hopefully it’s useful, good luck, thank you.