December 13, 2022
1 min read
For those of you who have problems like bootloop or LCD blank you can solve this problem by flashingand here I will discuss How to Flash Samsung J2 Prime for you mobile phone users with the Samsung J2 Prime brand.
How to flash or flashing itself is a way that can be done for serious problems such as bootloop or other problems related to data firmware by installing a new firmware on your cellphone.
Firmware is a program that is useful for carrying out functions on your cellphone such as the operating system on Windows.
In this article there is a way to flash a Samsung J2 Prime cellphone which is 100% guaranteed. work.
How to Flash Samsung J2 Prime Via Odin
Odin himself is a flashing special tools for mobile phones with the Samsung brand, because Samsung does not have recovery mode.
We recommend that you see how to flash using this Odin flashtool properly because it might be useful one day.
Because Odin flashtool is specifically for mobile phone users with the Samsung brand only.
Tools and Materials
Preparation is of course very important to start the process flashing because if you are not prepared, of course you will not be able to carry out the process flashing.
Before starting the flashing process, you must first prepare the tools and materials as below.
- Samsung J2 Prime mobile.
- Laptop or Computer.
- Data cable.
- Samsung J2 Prime Firmware (Official).
- Samsung USB drivers.
- Odin Flashtool.
I have prepared the file and you can download it below.
Samsung J2 Prime Flashing Steps
If you have prepared the tools and materials above, now you can follow the method to make flashing which I will explain below.
After all the files above you have downloaded, now you extract all the files, which amount to 3 files.
Make sure you listen and follow the steps below to make it work.
- For the first time you do is install “Samsung USB Drivers“This is so that your cellphone can be read by your computer or laptop.
- Then now you can enter the menu “Research Download“that is on your cellphone by pressing the button combination”Volume -, Home, Power” simultaneously and a display like this will appear.
- Now you can run the application “Odin” Then it will appear like this.
- Here now you can save the file “Firmware“Here we only use three files.
- To include files “Firmware“the first one you click”AP“then select files”Firmware” with the same kind.
- Next, enter the file “Firmware“with a click”CP” and reselect files “Firmware” with the same kind.
- Repeat the steps above, click “CSC” and select files “Firmawe” in the same format.
- If you haveinput then it will look like this.
- And now you can start”Flashing“by clicking the button”Start“Then wait a moment.
- If it is finished, your cellphone will automatically turn back on and enter the main menu in some time.
- If you experience failure or it takes longer than 20 minutes, then you can repeat the steps from the beginning by removing your cellphone battery.
Note: If you are still experiencing stuck then most likely the problem is with hardware your cellphone is not a problem software.
Also Read: How to Flash OPPO A37
That’s the discussion about How to Flash Samsung J2 Prime, hopefully this article can help you solve the problem, good luck, thank you.
