December 10, 2022
1 min read
For those of you who use Advan mobile phones and experience problems like Bootloop and Soft brick or other problems? take it easy here I will explain how to solve it, namely by flashing especially for How to Flash Advan S5E.
The Advan branded cellphone itself is a cellphone that is starting to be abandoned because there are many other brand cellphones that are better than Advan.
But of course you don’t need to worry if you get damaged software nor hardware there are still many spare parts or device updates that you can get right now.
Flashing itself is a way that you can do to overcome serious problems such as damage software can’t or fail to do boot to the menu.
Here I will discuss how to do flashing which is guaranteed to work once if you follow it in the way I will explain.
Flashing With SPD Flashtool
SPD Flashtool itself is a computer program that helps you to install firmware to your cellphone by booting from a laptop or computer.
Firmware itself is a driving program or system on your cellphone, which can be likened to windows for the operating system.
Tools and Materials
Before doing flashing You have to prepare the atat and materials in advance as below.
- Laptop or computer.
- Data cable.
- Mobile to be di flashing Advan S5E.
- Driver tool so that the cellphone is read by a computer or laptop.
- SPD Flashtool.
- Advan S5E Firmware.
Advan S5E Flashing Tutorial
Make sure you use the right and right way as I will explain, guaranteed to work 100%.
Also see: How to Flash Asus z007
If you have prepared the tools and materials, just follow the method I will explain below.
- You “Extract“First, all the files that you downloaded earlier because they were in zip form.
- If you have installed it first “Driver“So that your cellphone is read by a laptop or computer during the process” flashing walk.
- Then you can file “SPD Flashtool” and select “Researchdownload.exethen it will look like this.
- Then you can click icon in the form of a large gear to choose “Firmware“if you have clicked”OK“.
- Wait until it’s finished if it’s done it will read like this, if not you follow the first steps because you didn’t listen carefully.
- Now prepare”Data cable” and connect it to your computer or laptop.
- If you have now connected your cellphone to a computer or laptop by pressing the “Volumes –“.
- Then you can click “Start Downloadinglike the arrow below.
- And now you wait until the process is complete, keep in mind not to disconnect the cellphone from the computer because it will cause flashing fail.
- This process takes about 10 minutes or even more depending on the health of your cellphone.
- If it’s like this, you can turn it on manually, by removing the battery for 5 seconds then plug it back in and turn on your cellphone.
- Now you can use the Advan S5E cellphone again as before.
Note: this method will delete all data on your Advan S5E cellphone, so do it backup data first if possible.
If you follow the above method well, you can be sure that you have successfully flashed it yourself without using a service.
Also Read: How to Flash Asus x014d
That’s the discussion about How to Flash Advan S5E, hopefully with this article it can help you solve the problem, good luck, thank you.
