Procedure to Change HP Grab Driver 2022

Procedure to Change HP Grab Driver – Every Grab driver or driver uses a cellphone to receive orders from passengers.

If the cellphone used is lost or damaged, of course the drivers will not be able to work.

The way to replace the Grab driver’s cellphone is one of the most widely chosen methods or solutions.

By changing to a new cellphone, work can be resumed to receive orders from passengers.

Discussion of the Procedure for Changing the HP Grab Driver

However, how to replace this cellphone, you are required to report it first to Grab.

This is done so that the Grab account is safe and will not be suspected of violating or cheating.

To replace the Grab driver’s cellphone, it takes a short process, but when you have replaced it, you are required to register the IMEI of the cellphone used to Grab.

This is so that one Grab driver can only use one HP device, no more.

Actually, to replace the Grab driver’s cellphone, you can directly come to the nearest Driver Center office.

However, there is another way, namely by calling CC or the Grab call center.

Immediately, you see the procedure for replacing the HP Grab driver below, which we share.

Procedure to Change HP Grab Driver

Terms and Procedures for the Easiest Mobile Grab Driver Replacement

The way to move the Grab driver account to another cellphone can be used if you experience damage or loss.

Apart from that, never try to replace your cellphone, because that would violate Grab’s code of ethics.

Before going to the steps for the HP Grab Driver Replacement Procedure, please first look at some of the requirements to replace the Grab driver cellphone.

1. Requirements for Changing the Grab Driver HP

You are required to prepare several conditions that must be met to verify identity.

These conditions will later be useful when registering the IMEI of your new cellphone, as follows:

Please take a very clear photo of your ID card.
Try not to blur or blur.
Then take a selfie together by holding an ID card, try to make all the pictures clearly visible and the face is not covered.
Then take a photo of the cellphone and with the new IMEI, for how to check the IMEI please press *06#
Provide the license plate number of the motorbike used if asked.

2. How to Move Grab Driver Account to Another HP

If you still have access to the old cellphone, please delete the Grab Driver application first.

Next, when you have gained access to login to your new cellphone, now you just have to move the account, for the following steps:

Download Grab Driver on a new cellphone, you can download it via the following link: Grab Driver.
After that you open the application.
Please click Sign in via Google account.
Then you select a Google account that has been registered in the previous Grab driver application.
Eating there will appear a demo for the use of the application.
Then click Continue.
Next click OK to enter the main menu.
Finished.

Login in the Grab Driver application has been successfully carried out and is ready to be used to receive orders from passengers.

The final word

Those are some of the procedures that must be done in order to easily replace the Grab driver’s cellphone.

And we have also listed several requirements that must be carried out and prepared, so that they are not suspected of committing fraud.

Please be able to follow this method, if you are a Grab driver if you want to change your cellphone to a new cellphone.

That’s our whole discussion in this article about Procedure for changing HP Grab driver 2022. Hopefully useful and good luck.