And for the latest edition, by using a prepaid system, where you have to pay first in order to use electricity.
This prepaid system is often cheated by electricity pulse tokens, compared to the postpaid system.
This prepaid system means that you have to buy electricity first, like buying credit in general.
There will be several variations in buying prepaid electricity pulses, ranging from 20,000 pulses to 1,000,000 credits depending on the number of users and your needs.
So in this article, we will share how to hack a prepaid electricity meter.
Immediately, let’s see how to hack a prepaid electricity meter that we describe below.
How to Hack Prepaid Electricity Meter
1. How to Hack a Prepaid Electricity Meter with a Credit Token Hack
 |
| How to Hack a Prepaid Electricity Meter with a Credit Token Hack |
Most people must already have access to a PLN electricity meter, which is always evolving with the development of technology.
Previously you had to pay for the electricity meter once a month with the amount of electricity used.
Immediately, let’s look at some steps on how to hack a prepaid electricity meter by hacking the pulse token below which we have included as follows:
- You prepare in advance a prepaid electricity control card.
- Then you see how many prepaid electricity account numbers are used.
- After that you open or visit the following link: https://stimulus.pln.co.id/.
- Then enter your PLN electricity card account number in the customer’s special identity.
- Then you click search.
- Then you have transaction data for the purchase of prepaid electricity pulse tokens that are used.
- Then you notice in the Non-Cash kWh Token Transaction column, if a token appears, then you have managed to get a free electricity token from PLN.
- Then you try to use the electricity token and see if your prepaid electricity meter pulse will increase.
- Finished.
2. How to Hack Digital Prepaid Electricity Meter
 |
| How to Hack Digital Prepaid Electricity Meter |
If you misuse this second method, then all risks that will occur are your own responsibility.
The trick is to bypass the cable path from the power source that has entered your digital prepaid electricity meter, not the digital electric meter machine that has been tweaked.
This bypass system can be said to be quite safe, because the way it is done is very neat, and the contactors are placed in a hidden place above the ceiling.
So, if there is an inspection from PLN, it will be very difficult to find. You can buy a contactor of the SK-12 type at an electrician.
- Please look at the electricity meter used, then pay close attention to the cable from the PLN direction that is above the ceiling.
- After that, determine where to connect or steal the PLN cable before entering your home’s prepaid electricity meter.
- Do not let the position of the cable connection is not visible from the outside.
- Then you connect the contractor that you bought earlier.
- Before you connect the contactor, please turn off the MCB meter under your digital meter.
- Look carefully at the form of the contractor, then you connect each of the codes.
- It will be much better if you connect in stolen load and normal load first.
- After that, you just connect to the PLN network.
- Next you place the contactor in a very hidden place, then trim it, don’t let the contractor see if there is a wild connection, close it very neatly.
- Finished.
The final word
That’s our review in the article above on how to hack a prepaid electricity meter.
Please follow one of the ways to hack a prepaid digital electricity meter and also how to hack the pulse token.
It should be remembered together that all risks that will occur to your meter in the future are at your own risk.
That’s our discussion in this article about how to hack a prepaid electricity meter 2022. Hopefully useful and good luck.
