How to get the 2022 PLN Tamper Code

How to get the PLN Tamper Code – When you first install the electricity network at home, of course you have experienced problems where the light is on and there is the word ‘check’ on the prepaid meter.

This problem often occurs, because there are still many people who do not know that the seal of the meter should not be opened arbitrarily except by the PLN itself.

If you continue to insist on replacing or repairing a damaged meter yourself, it is likely that the electricity in your home will turn off.

As long as the word ‘Check’ is still there, then you will not be able to fill in the electricity token, so to fix this you must first enter the tamper code.

Before going to the main topic of getting a tamper code from PLN, it would be nice for you to understand what a Tamper code is.

Discussion on How to Get a PLN Tamper Code

Clear tamper or often abbreviated as CT is a 20 digit code or token that you can use to activate a prepaid meter that has already been sealed.

This code was deliberately created with the aim of making it easier for PLN officers to deal with problems with your prepaid meter.

Now to overcome or overcome these disturbances you can enter the 20 tampee codes.

How do you get the tamper code from PLN?

To be able to get these tampering codes, you can listen to the explanation below on how to get the PLN tamper code.

How to get the PLN Tamper Code

How to get the PLN Tamper Code on the Prepaid Meter

How to get the PLN Tamper Code on the Prepaid Meter

For how to get this PLN tamper code, you have to contact the PLN by telephone or you can go directly to the nearest PLN office.

Because this tamper code is a security code, not just anyone can get it.

Therefore, if your prepaid meter is damaged or experiencing problems, you can’t charge the electricity token, we recommend that you contact PLN immediately.

In order to be able to request a tamper code that you can use to repair damage or interference with your meter.

You can contact PLN via telephone at the call center “area code 123”, make sure you know your area code.

If you have got the tamper code, then you can directly enter the code into the meter.

How to enter the Tamper Code from PLN

How to enter the Tamper Code from PLN

If you have got a valid tamper code, then you can immediately enter it into your meter.

If you don’t know how to enter this tamper code, you can directly follow the method below:

• First you make sure that your prepaid meter is on and it says “check”
• If so, then you enter the tamper code.
• After all the tamper codes have been entered, then you press the enter button or the right arrow of your meter.
• If it is successful, the check text will disappear and you can immediately fill in the electricity token again.
• Finished.

The final word

Now that’s the way you can use to get the tamper token and how to enter the tamper code.

Hopefully the explanation above can give you a little knowledge to overcome interference with your prepaid meter.

For more details, you can continue to listen to our website so you don’t miss information about other interesting ways.

This is the entire contents of our discussion this time about the article How to get the PLN Tamper Code. Goodbye and good luck.