How to Overcome HP Water Intake – Who here has had an unpleasant experience such as a cellphone (HP) accidentally getting water in while washing dishes, getting rained on, or falling into a river?
Of course, this is very annoying because getting water in your cellphone has the potential to make you have to buy a new cellphone again.
There are a number of things that can result when your cellphone gets water, namely your cellphone is completely dead, so you feel frustrated because you have to buy a new one.
Second is, spare parts the damaged one. Like a foggy camera or whatever speaker which has a crackling sound due to water ingress.
All of these things certainly make you very irritated, but you don’t have to worry because there are several ways you can do to deal with your cellphone getting water in, including:
10 Ways to Overcome HP Water Intake
-
Keep away from water
The first step you have to do is to keep your cellphone away from water to make sure no more water can enter your cellphone.
If your cellphone is wet from the rain, then immediately put it in a waterproof bag or cover it with plastic.
This is an important step that you must do considering that water can enter through holes in the cellphone such as charger holes and holes. earphones.
-
Turn off HP
After keeping the cellphone away from the water source, the way to deal with the second water entering the cellphone is to turn off the cellphone.
However, this can be done when the cellphone that was exposed to water is still alive, because the cellphone must be turned off through the system turn off that is on HP, as if you want to do it restart.
This is intended not to press any buttons on your cellphone, such as the button on/off and loudspeaker button.
Because I’m afraid that the water will move/increase into other parts of the cellphone if you turn off the cellphone by pressing it.
-
Position HP
After you turn off a wet cellphone, don’t often shake the cellphone. This aims to avoid the entry of water deeper into your HP components.
Determine the position of the HP you want for the next stage, which is to dry the cellphone. It would be better if you position the cellphone in a standing position because it allows water to be in the hole charger will come out.
-
Dry HP
Wet HP must be dried immediately to minimize the incoming water will increase. The back and front (screen) must be dried.
Also make sure you dry the holes in your cellphone like holes earphonesSIM card slot, and slot charger.
You can dry with a towel that absorbs water, if you are not carrying a towel then immediately look for a tissue to dry your cellphone.
-
How to Overcome HP Getting Water, Removing HP Components
Once the HP has been dried on the outside, then you have to remove the HP components. The HP components in question are SIM cards and memory cards if you have one.
In addition to the SIM card and memory card, if your cellphone still allows the battery to be removed, then immediately remove your cellphone battery.
-
Don’t get too hot
Once your cellphone is wet, you will definitely feel panicked and feel you have to dry the cellphone immediately. And wet conditions that certainly bring moisture.
Most people will immediately dry a wet cellphone in direct sunlight, this is not recommended.
Because drying your cellphone directly in the sun will make your cellphone experience overheating which is not good for the battery.
This is also true with hair dryeryou are also not recommended to use hair dryer because it also has enough heat to make your HP overheating.
-
How to Overcome the HP Entering Water, Put the HP in the Rice
Rice is one of the common foodstuffs in Indonesian homes. This method has also become an open secret when HP enters water.
This is because rice is believed to absorb water, so it is hoped that soaking it in rice will attract the water that is in your cellphone.
The method is, you must have rice at least until all your HP is buried in the rice.
Then let it sit as long as you can, at least 2-3 days in the rice. And make sure the HP is off.
Next is, if possible, put the rice in it in the HP at room temperature that is quite warm, thus increasing the effectiveness of the rice.
Also make sure the temperature is not hot, because it is feared that it will cause overheating on your HP. While this doesn’t always work, it’s better than doing nothing.
-
Using Nine Lives
Nine Lives is the name of a product that is intended to absorb water in a wet cellphone. by basic This method is the same as using rice.
By being put in nine lives for approximately 24 hours and then seal the top that is already in the package.
This product is very easy as first aid if your cellphone is wet and you are not at home.
Unfortunately, this product is hard to find in Indonesia. But don’t worry because you can buy it on Amazon.
-
How to Overcome HP Water Intake, Place it in Silica Gel
Have you ever bought a shoe and saw that there was a white object in the shoe box? If so, then it could be silica gel.
Silica gel itself is a substance / object that can maintain moisture. Silica gel itself is formed from the clumping of sodium silicate sol (NaSIO2).
Silica gel is known to absorb moisture in electronics. Even its function can remove odors, preserve old items, and keep jewelry shiny.
The method is still the same as the rice method, which is buried in silica gel. Leave it for a few days with the HP off.
Luckily, silica gel can be easily found or purchased in Indonesia, one of which is through Shopee.
-
Bury the HP in the Cat’s Sand
Cat sand is one way to deal with HP getting water in. This is because cat litter can absorb water.
Because this sand is made to absorb dirt from cats or pets. If you have a cat, then you are definitely no stranger to this sand.
Once the sand is exposed to water, there will be an absorption process that causes the sand to clot and be easy to hold.
The method is still the same as the previous method, which is buried in the cat’s sand for a few days. Make sure you don’t bury it in your cat’s litter!
Those are 10 ways to overcome water ingress on your cellphone, with several available methods, the most important of which is to keep your cellphone away from water sources and be careful.
Although this method is not 100% successful, it is also not 100% guaranteed to fail because it depends on the condition of your cellphone and the amount of water that enters your cellphone.
If you’ve done the methods above and it still doesn’t work, then you can go to the store service The nearest cellphone for further inspection.
Also Read: 7 List of the Best Large RAM HP Anti-Slow
