First Aid Method For Android Who Has Hardbrick – The hard brick problem is a condition where the phone does not turn on at all. Or when connected to the charger is not detected. This could be due to an installation error. Or have you erased some important parts in the Android system so that you can experience hard brick conditions. If the smartphone is still under official warranty, you can immediately take it to the outlet where you bought it. But it’s different if the phone has expired.
So it takes some steps to overcome this condition. Don’t panic first because this hard brick problem will be lighter if we anticipate it first. This condition of the cellphone can also occur because the cellphone is too heavy to run the system. It could be that the device does not match the operating system with the various available updates. So there are many reasons behind this condition. Well, here’s a full review for first aid methods for androids who are experiencing hard bricks.
First Aid For Android Hardbrick
Silence the Smartphone for a while
Hard brick can occur due to the condition of the phone that is too hot. This hot condition occurs because the screen is constantly on, booting without stopping and other things that make the processor performance heavier. This will make the phone reach the maximum temperature limit. So with this condition, don’t panic first. you have to leave the smartphone for a while to stabilize the temperature then try to turn it back on.
Smartphone Charger
If the phone still won’t turn on after being idle, it could be that you run out of power when the phone is hard bricked. Try to charge it for 10 minutes. If it feels enough, try turning on your cellphone. If it works, chances are that the phone is overheating is the main cause of your hardbrick problem. But if it still doesn’t work, then move on to the next step.
Remove Battery
This one step is also known as a hard reset. By removing the battery you will automatically cut off the power supply and force the phone to reboot. Remove the battery and try to reinstall it. Try turning on the phone again. For built-in battery, press the power button for 10 seconds. If it doesn’t work, press for 30 seconds then the smartphone will be forced to reboot again so that the hardbrick problem will be fixed again.
Flash Via Odin
This one step is the ultimate method where you have to remove all the components attached to the smartphone. Starting from the battery, SIM and SD Card, etc. Connect the device to the PC/Laptop in this condition. After that insert the battery into the phone while holding down the volume up and down buttons. Then you will enter Download Mode then Flash Via Odin. For smartphones that have a built-in battery, press the volume up and down buttons for 15 seconds to enter Download Mode.
Those are some easy ways of android first aid who have hardbrick. If it still doesn’t work, consult the service center to get further treatment. Good luck.
Also Read: Unreadable SD Card
