How to Flash Asus HP Without PC 100% Latest Work

How to Flash Asus HP Without PC 100% Latest Work – Sometimes, when using an Asus smartphone or cellphone, there are problems or problems, whether it’s Bootloop, Stuck on the Asus Logo, it even hangs badly.

Previously I also made an article about how to flash samsung, xiaomi, vivo and oppo cellphones that you can try to use too, if your android phone is having the same problem as this one.

How to Flash All Types of Asus HP without a PC

Well, that’s why I made this article, which is to share a solution to the problem above. How to Flash an Asus cellphone in this article can be used for Asus Z007 cellphone models and the Zenfone series (Asus Zenfone Max Pro 2 and 1, Asus Zenfone Life l1, Asus Zenfone 2, 3, 4 and Zenfone 5). No need to linger, here’s how to Flash an Asus cellphone without a PC and with a PC.

How to Flash Asus Cellphone Without PC

You can use the steps below to solve and be a solution for your Asus Smartphone that is damaged/error, especially on Asus Zenfone models (Asus Zenfone Go, Asus Zenfone 2, Asus Max Pro M1, Asus Zenfone 4, etc.). Immediately, here are the steps or steps to flash an Asus cellphone without a PC.

Materials needed to Flash Asus HP Without PC

• SD Card, a minimum capacity of 4GB, the wider the better. Used to put Firmware type files in the form of .Zip (some can be in the form of .Rar).
• Firmware file of course, you just download the Firmware file that fits your Asus Smartphone model. You can find and get it on the official Asus Indonesia website. Move it to SD Card after getting it.
• Don’t forget to charge your Asus cellphone battery, at least 60% according to your battery capacity. It will be dangerous if your Asus cellphone dies in the middle of Flashing processing.

Steps to flash Asus without PC

How to Flash Asus HP Without PC

1. The first thing we have to do is so that your Asus cellphone is in Recovery Mode.
2. Well for those of you who can’t make your cellphone inside Recovery Mode.
3. It’s very easy, you just have to hold down the button at the same time Volume Down (some Asus Smartphone models need to press additional Volume Up button) + Power Button in a few seconds until the Android logo appears.
4. Then you release the finger holding the Power Button. While the finger holding the Volume Down button you keep holding it.
5. The next step that you need to pay attention to here in Recovery Mode is written Android Recovery is the Detail Version or Build Version as shown in the picture. The version details above can be your instructions to find a suitable Asus Firmware (picture 2)
6. Install the SD Card into your Asus cellphone.
7. Well, after that you just focus on the bottom of the Recovery Mode. Choose [Apply Update from External Storage] by using the Volume Down button to direct the instructions to the article earlier, then press the Power Button.
8. After that, you select a file that has a name similar to the Firmware that you downloaded earlier. Remember, the format is .Zip or .Rar.
9. Okay, after you do that, the Flashing process will automatically run on your Asus.
10. If you are suddenly on the Recovery Mode front page, don’t worry. It’s like that after you successfully flash it. Then you just have to choose [Wipe Data/Factory Reset] wipe data or factory reset > Yes. Then the process of deleting the data is running, you just have to wait for it.
11. Search and select [Wipe Cache Partition] wipe cache partition > Yes.
12. Search and select too [Reboot Now] restart now. Then your Asus cellphone will restart itself.
13. Finished.

If after you do step 9 an error appears [Your Device Is Corrupt] like picture 5, you don’t have to worry. Simply press and hold the Power Button for 6 seconds, it will restart again.

How to Flash Asus Cellphone With Laptop or PC

Flash an Asus cellphone with a PC if you have tried the Asus Flash method above but can’t, or the term is already severe, then the solution is to flash it with a PC. The steps or how to flash Asus (Zenfone, ROG, etc.) with a PC are below:

Materials needed to Flash Asus HP With PC

• USB drivers, which can be downloaded and searched on the internet, must be in accordance with their ability to handle Asus Firmware (especially the new version), so you need to pay attention.
• Asus firmware according to your cellphone model.

Steps to Flash Asus HP Via PC / Laptop

How to Flash Asus HP Via Laptop

1. Install and extract USB Drivers First, what is above, so that your cellphone can be connected to a laptop or PC.
2. Go to your laptop’s device manager by right-clicking the Windows logo (bottom left corner) and then selecting [Device Manager].
3. Then your mouse hovers over the option [Dekstop] and select.
4. Hover your mouse over [Add Legacy Hardware].
5. Then you choose [Aplication Hardware]], then select [Next].
6. select [Install the hardware that I manually select from a list (Advanced)]then select [Next].
7. select [Next] again.
8. Here you choose [Have Disk] and hover your mouse over [Browse].
9. And here you navigate to the USB Driver file that you have downloaded.
10. Next you choose Windows XP or 8. Oh yes, here if your Windows version is version 10, you can still use the Windows 8 option.
11. Then you select a file named [android_winusb] and you select Open.
12. Once you are in view number 8, you just have to choose [OK].
13. select [Next] and [Next] again.

And the USB Driver installation process is in progress, you just have to wait for it. Once you’re done, choose [Finish]. The USB Driver installation step has been completed, then the next step you will do is flash your Asus cellphone.

How to Flash Asus HP on PC

• You look for and point your mouse at your Asus Firmware file.
• Right-click on the file, then select [Extract Here] and you just wait until the file installation process has been successful.
• Okay, after you finish extracting it, you then go to the folder.
• And here you just have to select the file named [flashall_AFT]here too you do not get the wrong click.
• You double left click on the file, then a window will automatically appear CMD.exe like in the picture.
• Then the flashing process is running automatically.

Oh yes, if after you click 2 times in step 5 and the window does not appear as shown in the picture. Then you move the extracted file folder to local Disk D, and don’t put it in another folder, OK!. So you just put the file outside the folder so you can process it.

• OK, let’s wait until the flashing process is complete. It takes about 5 to 10 minutes, enough to be left to make coffee. The process can be faster depending on the specifications of your laptop or PC.
• When finished, your Asus cellphone will restart automatically, you just wait.

Don’t be happy just yet, you need to do a few things first so that your Asus cellphone can enter the OS and run perfectly.

Because after you have successfully flashed your Asus cellphone, some applications will not run, aka force close.

Even if you open Settings, it will automatically force close. For a solution, you can directly update your Asus system. Later there will be an Update notification in the top bar, you just need to update it directly to the Android 9 version or higher so it will return to normal.

The final word

So many ways to return Asus cellphone to Stock Rom or default Rom, or often called flashing. Hopefully it’s useful and if you have any questions, you can comment via the comments column below. Thank you and good health always.