How to Flash Vivo Bootloop, Forgot Password Without PC

How to Flash Vivo Bootloop, Forgot Password Without PC – No system is safe, maybe that’s the right word to describe all cellphones, especially Vivo brand cellphones. All cellphones must have problems, and on Vivo cellphones the most common attacks are Bootloop, Hang, Stuck on Vivo Logo and Forgot Password problems.

How to Flash Vivo Bootloop, Forgot Password Without PC

No need to worry, because I have made a solution that can wipe out the problems above, moreover this can be used for all or all types of Vivo cellphones. Call it Vivo Y series phones such as Vivo Y15, Vivo Y11, Vivo Y12, Vivo Y71, Vivo Y91C, Vivo Y91 and Vivo Y28. The Vivo V cellphone series is also not spared like the Vivo V9 and Vivo V11 cellphones.

Previously, I also shared many ways to flash xiaomi, samsung, oppo and asus cellphones which you might also try if you have a cellphone brand from one of the ones I mentioned above.

No need to linger, here is an article on how to Flash Vivo Hp due to Bootloop, Forgot Password, and totally dead for all types.

How to Flash Vivo Cellphone Without PC

As usual, to repair your Vivo cellphone that is error/damaged (Flashing) without a PC, you need an SD Card or external memory. For its own capacity, it is at least 4GB so that it is still quite relieved after being filled with Vivo Firmware. Below is how to flash Vivo cellphone manually.

Materials needed for Flashing HP Vivo

• SD Card of at least 2GB to put your Vivo Firmware file. Bigger is better because the Vivo Firmware file is around 1.4GB.
• Another cellphone to download the Firmware file and move it to the SD Card. You can borrow a parent’s or sibling’s cellphone.
• The Firmware file for sure, for the Firmware you can look for it on the internet which certainly matches your Vivo cellphone model.
• Try your Vivo cellphone battery at 50% (more is better) or charge your cellphone for 1 hour (can be adjusted depending on the charging speed of your Vivo cellphone).
• If not, then when the Flashing process runs and suddenly your Vivo cellphone dies, what happens next is that your cellphone experiences a Hard Brick or is completely dead and cannot turn on at all.

How to Flash Vivo HP Without PC

How to Flash Vivo HP Without PC

1. Alright, the first step is to insert the SD Card into your damaged Vivo cellphone, and previously put the Vivo Firmware file first.
2. The location/directory of the firmware is free, but I recommend it in the initial directory alias without being put in any folder on the SD Card.
3. Okay, after you input the SD card, the next step is to bring up the menu by pressing and holding the button Power Button + Volume Down at the same time.
4. Now after you enter the menu, then you have to enter Recovery Mode. That is by pressing Volume Down and then pressing the Power Button.
5. The Vivo logo will appear for a while, you just have to wait for it.
6. And then after you guys are in Recovery Menuyou choose [Install Update]. To do so simply press Volume Down and then press the Power Button same as in step 3.
7. Next because you have put the file Vivo Firmware it’s on the SD Card, then you have to choose [SD Card] in the Install Updates menu. To scroll through the instructions, you just need to do the same steps as steps 3 and 5.
8. You search and select your Firmware file in the next option. Remember, Firmware files are always in .Zip or .Rar format.
9. Then the installation process is already running and you just have to wait for it to finish. To see how far the process has gone, you just need to pay attention to the horizontal white line at the bottom of the screen.
10. When the installation process is successful, a notification will appear [Install Update Succesful]you just tap on the option [OK].
11. Then you choose an option [Back] > [Reboot System].
12. Wait until the boot process is complete, it may take 2 minutes.
13. Finished

How to Flash Vivo Hp With PC

Now, for the second one, you can use it when the damage or error is more severe / very severe, so that with the help of an SD Card alone you can’t handle it. What you need to have first is the SP FLASH TOOL application on your PC. For more, it’s below.

Materials needed for Flashing HP Vivo Via Laptop

• Firmware file that matches your Vivo cellphone model, if you have used the first Flash Vivo method above, you can use the file again. Or look it up on the internet. Then you extract it in a folder with the 2 files below.
• Software SP FLASH TOOL version 5you can get it on the official website, then extract it.
• A USB Driver file that supports your Vivo Firmware version, for information, you can search the internet or go to the Facebook group. Extract and then install the USB Driver file.
• Data cable / USB cable as a liaison between your Vivo cellphone and PC / Laptop.

How to Flash Vivo HP with PC

How to Flash HP With Laptop / PC

1. You first switch to a PC, by opening the SP FLASH TOOL application.
2. Put special files in the box [Download – Agent]the file is located in the SP FLASH TOOL folder with the name DA PL.Zip
3. Now to [Authetication File]fill it with the file that is in the Sp Flash Tool folder with the name Auth exists .auth file.
4. Last to part [Scatter – Loading File], then point your mouse to the extracted folder of your Vivo Firmware file. The file name is as shown in the picture (for mt6765 it can be adjusted to the name of your Vivo cellphone chipset) with the format .scatter
5. You just have to wait until the process of loading the 3 files above is complete in the SP application.
6. After waiting for it, you now switch to your damaged Vivo cellphone. If it’s still on, turn off your Vivo cellphone.
7. Oh yes, just in case your Vivo cellphone doesn’t die completely when it fails to flash because the firmware is not suitable, you can uncheck the preloader.
8. Back to the PC, you have to press the button [Download] in the top left corner. When finished, you connect your Vivo cellphone to the PC using a data cable while pressing and holding Volume Down on your Vivo cellphone. After that, the Vivo cellphone Flash process is running.
9. Turn your eyes to the PC, under the SP FLASH TOOL interface there will be a line running from left to right. If a yellow line is detected, you can put your Vivo cellphone after it.
10. Remember! Put it slowly so as not to make the connection disconnected. But if it’s already broken, then you just have to repeat steps number 6-8.
11. Flashing itself takes 5-10 minutes, you have to be patient enough to wait. And if the process is complete, a white tick notification will appear in a green circle.
12. Then restart your Vivo cellphone, you can also disconnect the data cable.
13. Finished.

Vital Records : Before pressing [Download] in the SP application, you can check the Driver’s. The steps are simply to press and hold Volume Down on the cellphone at the same time as connecting to a PC. If successful, the Device Manager will appear preloader.

The final word

That’s it, friends, some ways to flash Vivo cellphones that have problems such as bootloop, forgetting passwords for all Vivo cellphones by using a PC / Laptop or without a PC. Hopefully it’s useful and don’t forget to share it with your friends who are having the same problem. Thank you and good health always.