On this occasion, we will share tutorial How to Configure TeamViewer So It Can Be Accessed by Others In Local Network. When it comes to cross-platform remote control applications, TeamViewer is the first to come to mind. With many features to optimize the experience on mobile devices and computers on various types of connections, you can use TeamViewer for almost any kind of remote control requirements, whether it is for personal use, or for commercial purposes.
Using TeamViewer is quite simple, you just need to type in partner ID and password when you are prompted to do so, for authentication purposes and your partner’s desktop will be in front of you so that you can offer remote support to your partners.
Although TeamViewer optimizes your experience even on slow networks so that you can control your partner computer without any delay at all, but sometimes you need to remotely control a computer that might be connected to the same network as yours.
For example, if you are working in the same office with your friend and he is facing some problems, you can use TeamViewer to help your friend remotely without relying on wide area network, if your company or the terminal you are using is not connected to the internet.
Yes, TeamViewer can even handle local requests for access and offer support to computers connected to the same or local network without an internet connection. However, it is not enabled by default.
So, without further ado, here’s how to configure TeamViewer so that it can be accessed by others on the local network.
How to Configure TeamViewer So It Can Be Accessed by Others On Local Network
In order for TeamViewer to be accessible to others in the local network, you need to enable requests over LAN on the computer that needs to be controlled. For example, if you control your friend’s computer remotely, the option to handle requests from the local network must be enabled on that computer.
Step 1: To enable request reception over local network in TeamViewer, open TeamViewer on your computer and click on the menu “Extras” , then click “options“.
Step 2: In TeamViewer options, by default you are directly on the tab “GeneralIn the “General” tab, you will find an option that says “Incoming LAN connections“.
Step 3: By default this option says “deactivated“. Just click on the dropdown menu and click “accept“, so that others can access your computer using TeamViewer, even on a local network.
Step 4: There is another option that says “accept exclusively“, i.e. type of disabling requests over wide area network. I don’t recommend you to use the “accept exclusively” option as it will only accept incoming LAN requests to control your computer. Once you select the option, click on ‘OK‘ .
But if you have some security reasons and you don’t want others to try to access your computer via wide area network or internet, you can use the “accept exclusively” option, but it is not recommended for most of the users.
Step 5: If you use “accept exclusively” in area “ID bro“, you will find all IP addresses separated by ‘ , ‘, which can be used to control your computer remotely. This will only happen if you have multiple network interfaces configured.
Once the LAN connection is configured to be accepted on your computer, other users on the same network can access your computer using TeamViewer, with the help of the IP address configured for the computer locally. If your computer has multiple LAN ports, each of these ports has a different IP address. You just need to know your IP address and tell it to the person who will control your computer via TeamViewer.
You can find the IP address for your computer by opening the router control panel. Alternatively, you can even do it by using the command “ipconfig” in Windows and “ifconfig” on Linux.
If there are multiple IP addresses, you may have to ask your network administrator to find out, which IP address can be used by your friend to access your computer. Not all IP addresses can give your friend to access your computer.
Now you can even get support from your friends or family members, even if you are not connected to the internet if they are on the same network. This tutorial will work for all platforms where TeamViewer is supported.
That’s the tutorial on How to Configure TeamViewer so that it can be accessed by others on the local network. Hopefully this article is useful for those of you who need it. Don’t forget to share it on your social media.
