How to Solve the Error This PC can’t run Windows 11 | With the release of Windows 11, users all over the world are excited to install it on their PCs. Its new interface looks refreshing, attractive and user-friendly enough for most people.
But many users report encountering an error or error while installing Windows 11 that says “This PC can’t run Windows 11“. This is because Windows 11 requires two BIOS settings to be enabled before it can be installed, namely “Secure Boot” and “TPM 2.0“.
Also read: Download Windows 11 Wallpaper Free
There are two ways to resolve the error “This PC Can’t Run Windows 11“, that is, by activating Secure Boot in BIOS and enable
TPM 2.0 in the BIOS Settings. here’s how to solve and fix it on your PC system if you experience this error.
How to Enable Secure Boot in BIOS
Many users are experiencing the error “This PC Can’t Run Windows 11” with “The PC must support SecureBoot‘ was mentioned as the reason.
In this case, you have to enable “Secure Boot” from BIOS settings. But before you enable it, it is very important for you to understand what Secure Boot is.
What is Secure Boot?
This is a security standard developed to ensure that PCs boot only with software that is trusted by OEMs (Original Equipment Manufacturer). It prevents any malicious software or malware from booting up when you start the computer. When the setting is enabled, only drivers that have a certificate from Microsoft will be loaded.
Now that you understand about the concept of “Secure Boot”, it’s your time to enable Secure Boot.
Here are the steps to enable Secure Boot:
-
Turn off your PC then press the Turn On button to turn it on. As soon as you see the screen light up, press the ESC key to enter the “Start Up” menu.
-
In the “Start Up” menu, look for the button to enter “BIOS Setup”. It generally uses the F10 key, however, if different, you can also enter the BIOS setup directly from the boot screen by pressing either the F8 or F10 keys.
-
In “BIOS Setup”, there will be several tabs listed. Select the “Advanced” tab.
- Next, from the list that appears, select “Boot Options”.
-
Now, you will be presented with various boot options. Find the “SecureBoot” option and check the box next to it.
- Finally, click the “Save” option to apply the new BIOS settings.
After enabling “SecureBoot”, you may not be able to boot the system. Therefore, when restarting your PC, go back to the “Start Up“, select “Boot Device Options“, select dUSB rive where you install Windows 11
and proceed to the installation.
How to Enable TPM 2.0 in BIOS Settings
One of the other minimum system requirements for Windows 11 is support for TPM 2.0. Windows 11 installer shows error “The PC must support TPM 2.0” when you run the installer from within Windows, not via a bootable USB. There it might just show the error “This PC can’t run Windows 11”.
Fortunately, it’s easy to enable TPM 2.0 in BIOS Settings. But before you proceed with enabling “TPM 2.0” in the BIOS, first let’s also verify its current state in the system.
To verify “TPM 2.0” status, press WINDOWS + R to launch the command “RUN“, then type:
tpm.msc in the text box, then click “ok” or press ENTER to launch the TPM Management dialog.
Next, check the “Status“. If it shows.”The TPM is ready for use“, means it’s been activated.
But, if you see “Compatible TPM cannot be found“, means it’s not enabled yet. And now it’s time for you to enable it in BIOS settings.
Notes: The process may vary for each manufacturer, you are advised to visit your PC hardware manufacturer’s support page if the following steps are not applicable on your PC system.
To enable “TPM 2.0”, follow these steps:
-
Turn off your PC then press the Turn On button to turn it on. As soon as you see the screen light up, press the ESC key to enter the “Start Up” menu.
-
In the “Start Up” menu, look for the button to enter “BIOS Setup”. It generally uses the F10 key, however, if different, you can also enter the BIOS setup directly from the boot screen by pressing either the F8 or F10 keys.
-
You will now find several tabs listed at the top. Navigate to the “Security” tab.
-
Now, search for “TPM Device”, click on the option next to it, and select “Available”.
- Finally, click “Save” to apply the new settings.
That’s the tutorial how to solve the error “This PC can’t run Windows 11”. I hope this article helped you! Thank you for visiting and don’t forget if you find this article useful, please share it with your friends too.
