5 Easy Ways to Limit Indihome Wifi Speed
5 Ways to Limit Indihome Wifi Speed Easily – WiFi is a complement to needs that must be available anywhere and anytime. In this modern era, the need for fast and adequate internet is important. For customers who use Indihome WiFi and are already spreading it passwordto many people, often bandwidth WiFi is getting old. Because of that, bandwidth this must be limited so that the speed remains uniform. Here’s how to easily limit Indihome WiFi speed:
1. Type IP Address
The first step that can be done is to type the IP address on the page browsers, like Chrome. IP address for each router usually different. However, Indihome usually provides router in the form of TP-Link to the user, which has an IP address of 192.168.1.1. Type this IP address on search bar then click button enter.
For the IP address of router Huawei is 192.168.1.1, 192.168.1.254, or it could be 192.168.0.1. Other IP addresses can be found easily in search engines. After that, click Enter. The user will be redirected to another page.
2. Enter Name and Password
Next for how to limit Indihome WiFi speed is to type username or name along password or password on the page provided. If it doesn’t work, then look at the back of the routers, there it is usually written username and default password from routers. But if you still can’t log in, then it’s most likely password has been replaced.
If the user can’t remember passwordthen immediately contact Indihome. Usually, Indihome won’t replace it arbitrarily password the customer. Indihome will follow up.
3. Go to Wireless (2.4 GHz)
After success login, then select the Network option on the left of the screen, then click Wireless (2.4GHz). in section mode, change setting to mode b. Next, just click save. After that, the WiFi will be disconnected and reconnected in a few moments. By following these steps, the WiFi speed can be drastically reduced.
However, the location of these settings may vary depending on each routers, there may even be router which does not exist this setting. If so, then the customer can proceed to the next method.
4. Enter the DHCP Client
The next step in how to limit the speed of Indihome WiFi is selecting the DHCP option, then entering the DHCP Client. A page will appear showing the number of IPs connected to WiFi. Next, select and note the IP address for which you want to minimize the speed.
5. Select Bandwidth Control
Next, after writing down the IP address code that you want to minimize, click the option Bandwidth Controlthen click Rule List. In the new page that appears, type the selected IP address. Part Egress Bandwidth and Ingress Bandwidth also need to be filled at the desired speed. Egress Bandwidth is the speed forupload something. Whereas Ingress Bandwidth the opposite, is the speed at which something downloads.
Both parts have Kbps units, so make sure the numbers entered are the ones you want. The rest of the sections can be left blank. After that, select the Save option. For router Otherwise, the method is almost the same, namely, just select the Bandwidth Control option and replace the Egress and Ingress sections with the desired numbers.
Thus, the steps above are a way to easily limit Indihome WiFi speed. To make sure that the speed has changed, check the WiFi condition on Windows, on control panel Networks & Internet. Or it could be by doing a WiFi speed test on Google. It can be seen that the WiFi speed is now decreasing after being restricted. Good luck.
