Skip to content Skip to sidebar Skip to footer
Home / Technology

Read-only pendrive is not a problem, this is the way to solve it!

How to overcome the write-protected pendrive header

Gadgetren – Pendrive Write Protected is not a big problem. However, the problem is very annoying and it is quite time consuming to resolve.

Read-only is a state where the flash that we have is locked so that users cannot format, add, or even delete any data.

Read-only can occur for many reasons including the origin of the flash drive being disconnected from the computer, virus, etc.

To solve this problem, users can do several things such as: B. the command prompt, regedit or the help of third-party applications.

The easiest way to solve the read-only flash problem is to use the command in the command prompt. This method involves a fairly straightforward path as every computer with a Windows operating system must have it by default.

How to overcome a write-protected flash drive with CMD

To do this, users can follow the steps below.

How to overcome a write-protected flash drive with CMD

  1. Connect the flash to the computer.
  2. Open the command prompt as an administrator.
  3. Enter command Diskpart.
  4. Then give orders Hard drive list, and choose my hard drive, replace me with the number for the lightning bolt.
  5. Type Erase disk attributes read-onlywhen you’re done, enter the command clean.
  6. Enter list volume and select the volume that says unusable
  7. Then enter format fs = bold32 or format fs = ntfs according to the desired hard disk format.
  8. Then type Exit.

Remember that every time they type a command in the command prompt, the user must also press Enter to activate the command.

How to fix a write-protected flash drive using Registry Editor

How to overcome write-protected flash drive using regedit

If using the command prompt does not work, the user can overcome the read-only flash using the registry editor (regedit). To use Regedit to troubleshoot a write-protected flash drive, do the following:

  1. Open Regedit by pressing the key Windows + R and type Regedit followed by key Enter
  2. Go to the section HKEY_LOCAL_MACHINE then SYSTEM then CurrentControlSet seek steering and go to Storage Device Guidelines
  3. Search options Write protection, right click on the option and select Change
  4. Then change the value data to numbers 0, and click OK
  5. In this case, remove the flash drive, restart the computer, and reconnect the flash drive to format it

This is how you overcome a write-protected pendrive with an application

If the above two methods fail, another alternative is to use the help of third-party applications. There are many applications that can be used to solve this problem, one of which is the Fat32 Format Tool GUI.

Of course, each application has a different way of using it. Users can follow the documentation on the application’s official website or search for it through a search engine.